Chapter 2. Installing and Using RF ValProbe Software
18 RF ValProbe® User’s Manual
2.2 PC Requirements
To run the RF ValProbe Windows-based software, your PC should meet the following
minimum requirements:
• Pentium or equivalent microprocessor with 1 GHz processor speed and at least 1 GB
RAM
• At least 40 GB hard disk space available
• Microsoft Windows XP SP3 or Windows 7 Professional 32 bit or 64 bit
• Microsoft Office 2007 or 2010 (32 bit only) for reporting
• One unused USB port for communicating with the Base Station or an Ethernet
connection
• Windows printer with graphical printer capability
• VGA color monitor with resolution at least 800 X 600.
If you are performing a calibration:
• One 9-pin serial port for IRTD communication, and the Kaye Calibration Interface
(supplied with the IRTD), or an additional USB port with USB-serial adapter
To Next Page