Kaye RF ValProbe - Chapter 1. Setting Up the RF ValProbe; 1.1 Introduction

Chapter 1. Setting Up the RF ValProbe
RF ValProbe® User’s Manual 1
Chapter 1. Setting Up the RF ValProbe
1.1 Introduction
1.1.1 Unpacking
Unpack the Kaye RF ValProbe
®
Loggers and Base Station carefully and inspect them for
any damage that may have occurred during shipment. If there is shipping damage, notify
the carrier immediately. Verify that the following are present:
• Kaye RF ValProbe Base Station and power supply
• USB Cable
• Power cord
• Kaye RF ValProbe Loggers and calibration certificates
• Kaye RF ValProbe Software Package
1.1.2 Safety Information
Use this instrument only as specified in this User's Guide.
• The protection provided by the equipment may be impaired if the equipment is used in
a manner not specified by Kaye.
• Do not use this equipment in environments other than those listed in the User's Guide.
1.1.3 Overview
The Kaye RF ValProbe system is a wireless thermal validation system that collects
temperature and humidity data. The Kaye RF ValProbe system is designed for accurate,
convenient, and reliable process validation of environmental chambers and storage areas.
These applications include stability chambers, freezers, refrigerators and warehouses. A
2.4-GHz RF mesh network and multiple-redundant data storage support communications
and storage of critical validation data, while safeguards guarantee data integrity, storage
and compliance with regulatory requirements.