Kaye RF ValProbe - 1.2 Calibration

Chapter 1. Setting Up the RF ValProbe
2 RF ValProbe® User’s Manual
1.1.3 Overview (cont.)
The system consists of Kaye RF ValProbe Loggers, a Kaye RF ValProbe Base Station, and
Windows-based software for programming and reading the Loggers, calibrating Loggers,
verifying their calibration, and generating reports (see Figure 1 below).
Data from multiple wireless Loggers is combined in a single file from which reports are
generated. These reports are designed for implementation of 21 CFR Part 11 requirements
for electronic records. Users can customize the reports by defining process cycles and
specifying cycle-based calculations.
Figure 1: The Kaye RF ValProbe System