Chapter 2. Installing and Using RF ValProbe Software
RF ValProbe® User’s Manual 21
2.3.1a Setting up Site Options
When you start up the program for the first time, you will first set up the System
Administrator Site Options, which provide more flexibility while running the RF ValProbe
software. You can enable any combination that your site supports.
• Set a login timer for user identification. The login timer allows users, after initial
identification, to enter only their password if user identification is within the preset
time limit. When this option is enabled, the login timer can be set from 1 to 15
minutes.
Note: If you enable this option, the Time Interval readout displays to the right of that
option, and the timer is initially set to 5 minutes. You can set the timer from 1 to 15
minutes using the spin buttons.
• Require minimum-length passwords for all user accounts, from 6 to 16 characters.
Note: If you select this option, use the spin buttons to set the requirement from 6 to 16
characters. The password expiration requirement can be set from 1 to 366 days
with the spin buttons. Click the spin buttons once to move in 1-day increments, or
click and hold to move in 10-day increments.
• Set passwords to expire after a number of days, up to 366. Users will be prompted to
change their password once their current password has expired. By default, passwords
are set to expire after 180 days. The software will display the password expiration date
to the user at login when there are five days or less until their password expires.
To Next Page
Loading...