Chapter 2. Installing and Using RF ValProbe Software
RF ValProbe® User’s Manual 19
2.3 Installing RF ValProbe Software
In addition to standalone operation, Kaye RF ValProbe offers the option of configuring the
software for network capabilities. The RF ValProbe data files can thus be saved to and
reported on from a central network location, rather than stored on each individual PC's
hard drive. In addition, by enabling network capabilities, the RF ValProbe software will
utilize one central password database for managing user names and passwords. You can
then manage passwords for all your users in one place, rather than having a different
password database on each PC running the Kaye RF ValProbe software.
Note: Network installations may not use the distribution set. Instead, users must create a
customized network folder.
• If you are installing Kaye RF ValProbe to a network drive (from which you will install
it to individual PCs), proceed to “Installation for a Network Application” on the next
page.
• If you are installing Kaye RF ValProbe to an individual PC, proceed to “Installation
for a Standalone Application” on page 24.
To Next Page
Loading...