Kaye RF ValProbe - Installation for a Network Application

Chapter 2. Installing and Using RF ValProbe Software
20 RF ValProbe® User’s Manual
2.3.1 Installation for a Network Application
1. Be sure the network drive is mapped on your PC. On the drive, identify or create a
network location (folder) to hold the RF ValProbe installation and data files. This
location will also provide a central database for managing user names and passwords.
The folder should be protected against data deletion.
2. Insert the RF ValProbe CD into your CD-ROM drive. If the installation does not
automatically begin, complete the following steps:
• Click Start on the Windows task bar, and then click Run.
• Click Browse. From the Browse dialog box, select your CD-ROM drive, click
Setup.exe, and then click Open.
3. Follow the on-screen instructions to perform the installation.
4. Click on the appropriate installation path to install Kaye RF ValProbe to the network
drive.
5. Once installation has completed, the Kaye RF ValProbe Initialization program will run
automatically. The Kaye RF ValProbe splash screen will appear, followed by the two
System Administrator Site Options screens -- Policies and Preferences.