Kaye RF ValProbe - User Manual

M5010 Rev. G
April 2014
Validation
Amphenol
Advanced Sensors
RF ValProbe®
User’s Manual
e
Kaye RF Va
l
Pro
be
®
S
EN
SO
R N
O
D
E

Summary

Chapter 1. Setting Up the RF ValProbe

1.1 Introduction

Provides an overview of the system, including unpacking and safety.

1.2 Calibration

Details calibration data storage and verification procedures.

1.3 Setting Up the RF ValProbe System

Guides through the four main steps to set up the RF ValProbe system.

Chapter 2. Installing and Using RF ValProbe Software

2.1 Introduction

Outlines software installation and basic system administration tasks.

2.2 PC Requirements

Lists the minimum hardware and software specifications for the PC.

2.3 Installing RF ValProbe Software

Covers installation for both network and standalone applications.

2.4 Starting the RF ValProbe System

Details the initial startup procedure for the RF ValProbe system.

2.5 Creating User Accounts

Explains how to create System Administrator and Operator accounts.

2.6 Viewing the RF ValProbe Hardware Inputs

Guides on checking system functionality via the Hardware tab.

2.7 Accessing the Kaye RF ValProbe Online Help

Describes how to navigate and use the software's integrated help system.

Appendix A. Specifications

A.1 RF ValProbe System Specifications

Lists general specifications for the RF ValProbe system.

A.2 Base Station

Details specifications for the Base Station, including connections and power.

A.3 Logger

Provides specifications for the Logger, including measurement types and environmental factors.

A.4 Environmental;EMC

Outlines Environmental and EMC (Electromagnetic Compatibility) specifications.

A.5 Environmental

Details environmental specifications for logger and base station operation.

Appendix B. Using the OPC Server and Client

B.1 Introduction

Introduces the Kaye OPC Server for real-time monitoring.

B.2 Installing the OPC Server

Provides step-by-step instructions for installing the OPC Server.

B.3 Locating Base Stations on Network

Guides on discovering and identifying Base Stations on the network.

B.4 Setting up a Communication Channel

Details how to set up a communication channel for the RF ValProbe.

B.5 Setting up a New Device

Explains how to add and configure RF ValProbe devices on the OPC Server.

B.6 Viewing Measurement Units

Describes how to view sensor and channel information on the OPC Server.

B.7 Setting Up the OPC Test Client

Guides on setting up and using the OPC Test Client.

Appendix C. Environmental Compliance

C.1 Waste Electrical and Electronic Equipment (WEEE) Directive

Explains the company's participation in the WEEE take-back initiative.

C.2 Battery Disposal

Provides information on proper battery disposal and markings.

Kaye RF ValProbe Specifications

General

Resolution	0.01°C
Data Logging	Yes
Communication	RF Wireless
Probe Length	Various lengths available
Compatibility	Kaye Validator