Kaye RF ValProbe - 1.3 Setting Up the RF ValProbe System

To Next Page

To Previous Page

Chapter 1. Setting Up the RF ValProbe

RF ValProbe® User’s Manual 5

1.1.5 Kaye RF ValProbe Temperature/Humidity Loggers (cont.)

Figure 3: The RF ValProbe Logger with External Sensor

Each Logger can record up to 10,000 readings per sensor or input; the data is sent to the

Base Station and stored simultaneously in the Logger and Base Station memories. When

prompted by the RF ValProbe software, the Loggers send this data to the computer via the

Base Station for reading into a study, report creation and data calculation.