Keithley 2303 - Measure[:<Function>]; Measure:array[:<Function>]

To Next Page

To Previous Page

9-4 Signal Oriented Measurement Commands

:MEASure[:<function>]? Execute :READ? on speciﬁed function

:MEASure:ARRay[:<function>]? Execute :READ:ARRay? on speciﬁed function

Parameters <function> = CURRent[:DC] Measure current

VOLTage[:DC] Measure voltage

PCURrent Measure pulse-current

DVMeter Measure DVM input

LINTegration Perform long integration current

measurements.

When the MEASure? command is sent, the speciﬁed function is selected and then the READ?

is executed. When the MEASure:ARRay? command is sent, the speciﬁed function is selected

and the READ:ARRay? command is executed. See READ? and READ:ARRay? for details.

If a function is not speciﬁed, the measurement(s) will be performed on the function presently

selected.

NOTE There are no AVERage commands for long integration measurements. The array size

for long integration readings is ﬁxed at one. Therefore, MEASure:LINTegration? and

MEASure:ARRay:LINTegration? are basically the same.

Other manuals for Keithley 2303