Keithley 2303 User Manual

SCPI Tables 11-7
Table 11-6
STATus command summary
Notes: 1. Commands in this subsystem are not affected by *RST. The effects of cycling power, *CLS, and :STATus:PRESet
are explained by the following notes.
2. Event registers Power-up and *CLS — Clears all bits of the registers
:STATus:PRESet — No effect
3. Enable registers Power-up and :STATus:PRESet — Clears all bits of the registers
*CLS — No effect
4. Error queue Power-up and *CLS — Clears the error queue
:STATus:PRESet — No effect
5. Enable/disable Power-up — Clears list of messages
error queue *CLS and :STATus:PRESet — No effect
messages
Command Description
Default
parameter
SCPI
:STATus
:MEASurement
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:OPERation
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:QUEStionable
[:EVENt]?
:ENABle <NRf>
:ENABle?
:CONDition?
:PRESet
:QUEue
[:NEXT]?
:ENABle <list>
:ENABle?
:DISable <list>
:DISable?
:CLEar
Path to control the measurement event registers:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Path to control the operation status registers:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Path to control the questionable status registers:
Read the event register.
Program the enable register.
Read the enable register.
Read the condition register.
Return status registers to default states.
Path to access error queue.
Read the least recent error message.
Specify error and status messages for queue.
Read the enabled list of messages.
Specify messages not to be placed in queue.
Read the disabled messages.
Clear all messages from error queue.
(Note 1)
(Note 2)
(Note 3)
(Note 2)
(Note 3)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
(Note 5)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√

Keithley 2303 Specifications

General

Brand	Keithley
Model	2303
Category	Power Supply
Language	English