1-6 Getting Started Model 6220/6221 Reference Manual
Return to Section 1 topics
Models 7008-3, 7008-6 and 7008-13 – Single-shielded standard GPIB
cables. Each end is terminated with a feed through molded plastic housing.
Model 7008-3 is 0.9m long; 7008-6 is 1.8m long; Model 7008-13 is 4m long.
Model 7010 – Shielded IEEE-to-IEEE Adapter. Provides additional clearance
between the rear panel and GPIB cable connector. Allows easier access to
cables and other connectors.
RS-232 cable (connects Model 622x to the RS-232):
Model 7009-5 shielded RS-232 cable – This straight-through cable connects
the RS-232 of the Model 622x to the RS-232 interface of the PC. This cable is
5ft. long and uses shielded cable and connectors to reduce electromagnetic
interference (EMI).
For Delta, Pulse Delta, or Differential Conductance, DO NOT use the Model
7009-5 cable for serial connections between the Model 622x and Model 2182/
2182A. A null-modem serial cable is required and is a supplied item.
Trigger link cables and adapter:
Models 8501-1 and 8501-2 trigger link cables – Connects the Model 62xx
to other instruments with Trigger Link connectors (e.g., Model 2182/2182A).
Model 8501-1 is 1m long; Model 8501-2 is 2m long.
Model 8502 trigger link adapter – Lets you connect any of the six trigger link
lines of the Model 622x to instruments that use standard BNC trigger connec-
tors.
Model 8503 DIN to BNC trigger cable – Lets you connect trigger link lines
one (input) and two (output) of the Model 622x to instruments that use BNC
trigger connectors. Model 8503 is 1m long.
Rack mount kits
Model 4288-1 single fixed rack mount kit – Mounts a single Model 622x in a
standard 19-inch rack.
Model 4288-2 side-by-side rack mount kit – Mounts two instruments
(Models 182, 428, 486, 487, 2000, 2001, 2002, 2010, 2182, 2182A, 2400,
2410, 2420, 2430, 6220, 6221, 6430, 6485, 6487, 6517A, 7001) side-by-side
in a standard 19-inch rack.
Model 4288-4 side-by-side rack mount kit – Mounts Model 622x and a
5.25-inch instrument (Models 195A, 196, 220, 224, 230, 263, 595, 614, 617,
705, 740, 775A, 6512) side-by-side in a standard 19-inch rack.
Carrying case
Model 1050 padded carrying case – A carrying case for Model 622x. Includes
handles and shoulder strap.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
