To Next Page

To Previous Page

14-10 SCPI Reference Tables Model 6220/6221 Reference Manual

Return to Section 14 topics

:CABort <b> Enable to abort test on compliance: ON or OFF OFF

:CABort? Query compliance sweep abort state.

:CSWitch <b> Enable cold switching mode: ON or OFF. OFF

:CSWitch? Query cold switching state.

:ARM Arm Delta.

:ARM? Query arm. 1 = Delta armed, 0 = not armed.

:PDELta Pulse Delta operation: 5

:NVPResent? Query connection to 2182A: 1 = yes, 0 = no.

:HIGH <NRf> Set high pulse value (amps): -105e-3 to 105e-3. 1e3

:HIGH? Query high pulse value.

:LOW <NRf> Set low pulse value (amps): -105e-3 to 105e-3. 0

:LOW? Query low pulse value.

:WIDTh <NRf> Set pulse width (seconds): 50e-6 to 12e-3. 110e-6

:WIDTh? Query pulse width.

:SDELay <NRf> Set source delay (seconds): 16e-6 to 11.966e-3. 16e-6

:SDELay? Query source delay.

:COUNt <NRf> Set number of Pulse Delta readings to perform:

1 to 65636 or INFinity.

INF

:COUNt? Query Pulse Delta count.

:RANGing <NRf> Select fixed pulse source range: BEST or FIXed. BEST

:RANGing? Query fixed pulse source range.

:INTerval <NRf> Set interval (in PLCs) for each pulse cycle: 5 to

999999.

:INTerval? Query interval.

:SWEep Pulse Delta Sweep output:

[:STATe] <b> Enable or disable Sweep output mode. OFF

[:STATe]? Query state of Sweep output mode.

:LMEasure <NRf> Set number of low measurement per cycle: 1 or 2. 2

:LMEasure? Query number of low measurements.

:ARM Arm Pulse Delta.

:ARM? Query arm. 1 = Pulse Delta armed, 0 = not

armed.

Table 14-6 (cont.)

Source command summary

Command Description Default Sec SCPI

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Keithley 6220 User Manual

Questions and Answers: