Why does no picture appear on the external monitor connected to my Kenwood Car Receiver?
If no picture appears on the external monitor connected to your Kenwood Car Receiver: * Connect the video cord correctly. * Select the correct input on the external monitor.
Why is there static noise while listening to the radio on my Kenwood Car Receiver?
If you are experiencing static noise while listening to the radio with your Kenwood Car Receiver, make sure the aerial is firmly connected.
How to fix 'No Signal' error on Kenwood Car Receiver?
If your Kenwood Car Receiver displays a “No Signal” error: * Start the playback on the external component connected to AV-IN input terminal. * Check the cords and connections. * The signal input may be too weak.
Why does my Kenwood Car Receiver say 'Parking off'?
When your Kenwood Car Receiver displays 'Parking off', it means no playback picture is shown because the parking brake is not engaged.
What does “USB Device Error” mean on my Kenwood Car Receiver?
The “USB Device Error” on your Kenwood Car Receiver indicates that the USB power voltage is abnormal. Try turning the unit off and then on again. If the issue persists, connect another USB device.
Why is the phone sound quality poor on my Kenwood Car Receiver?
If the phone sound quality is poor on your Kenwood Car Receiver, try reducing the distance between the unit and the Bluetooth mobile phone. Alternatively, move the car to a location with better signal reception.
What does 'Miswiring DC Offset Error' mean on my Kenwood Car Receiver?
The “Miswiring DC Offset Error” or “Warning DC Offset Error” on your Kenwood Car Receiver indicates that a speaker cord has shorted or is in contact with the car chassis. To resolve this, wire or insulate the speaker cord appropriately and then reset the unit.
How to fix Kenwood Car Receiver when no sound comes out of speakers?
If no sound is coming from the speakers of your Kenwood Car Receiver, first, adjust the volume to the desired level. If that doesn't work, check the cords and connections to ensure they are properly connected.
Why won't my Bluetooth device detect my Kenwood Car Receiver?
If your Bluetooth device is not detecting the Kenwood Car Receiver: * Check whether the Bluetooth adapter (KS-UBT1) is inserted correctly. * Try searching from the Bluetooth device again.
How to stop the sound from skipping on my Kenwood Car Receiver with Bluetooth?
If the sound is being interrupted or skipped while using a Bluetooth audio player with your Kenwood Car Receiver: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Disconnect any device connected for Bluetooth phone use. 3. Turn the unit off and then on again. 4. If the sound is still not restored, try connecting the player again.
Essential safety precautions, monitor care, and guide on reading the manual.
First-time setup, language, panel angle, and AV input configuration.
How to choose between different audio/video sources like TUNER, DISC, iPod, USB, etc.
Step-by-step guide for handling discs and starting playback.
Controls for playing DVD, DivX, MPEG, and JPEG files.
Controls for playing CD, MP3, WMA, WAV, and AAC files.
Connecting and playing files from a USB mass storage device.
Connecting and preparing your iPod or iPhone for use with the unit.
Controlling playback, repeat/random modes, and track selection for iPod/iPhone.
How to listen to the radio, view text information, and use tuner features.
Connecting and viewing the navigation system screen and guidance.
Adjusting sound settings using equalization and preset sound modes.
Activating and displaying the rear view camera feed.
Comprehensive guide to configuring various system parameters like audio, display, and input.
Pairing procedure for mobile phones and audio players for the first time.
Common error messages, their causes, and suggested remedies.
Solutions for general issues like no sound, no picture, or unit not working.
Step-by-step guide for installing the unit, including safety warnings.
General| Touch Panel | Yes |
|---|---|
| DVD Player | Yes |
| USB Input | Yes |
| iPod/iPhone Compatibility | Yes |
| Navigation | No |
| Rear View Camera Input | Yes |
| AM/FM Tuner | Yes |
| Video Output | Yes |
| Resolution | 800 x 480 pixels |
| Compatible Media | DVD, CD |
| Audio Output Power | 4 x 50 Watts |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Compatible Formats | MP3, WMA, AAC, JPEG |
| Screen Size | 6.1 inches |
To Next Page
