AEJ-C/AES-C/PLJ-C-BA-e-1621 27
7.6.2 Switching on and off
The weighing balance will remain switched on as long as it is connected to the power
supply. Operate the ON/OFF-key to turn on/off the display.
To turn on the display, press the ON/OFF-key.
Wait for the basic display to appear.
To switch off, press the ON/OFF button again. During this process
the weighing balance will be moving into ready mode.
The weighing balance will be ready for operation immediately after
activation without requiring any time to warm up.
7.6.3 Selecting user language
The display is configured to German upon delivery. For setting additional languages
see chap.11.
7.6.4 Log on and off (activated user profile only)
The weighing balance is delivered without user profile and you can configure your
own settings. If the settings are to be protected against unauthorised access, create
a password protected user profile.
The user database (<operator / user> database allows you to create up to ten user
profiles with specific settings and user rights, see chap.15.1.
The weighing balance is also designed for use without user management.
An enabled user profile will be indicated by the icon on the display.
To Next Page
Loading...
Need help?
General
