AEJ-C/AES-C/PLJ-C-BA-e-1621 99
18 Checkweighing
In checkweighing an upper and a lower limit value (lower / upper threshold) can be
established to ensure that the weighed goods are exactly within the established
tolerance limits.
Any falling short of or exceeding the limits will be indicated on the screen by the
indicators <MIN>, <OK> or< MAX>.
18.1 Settings <P2.4> CHECKWEIGHING>
Applications can be adapted to your requirements by creating application-related
settings. The settings available depend on the currently enabled application.
A part of these settings is global, that is, they are – apart from a few exceptions –
identical
to t
he weig
hing
applicati
on (See
chap
9.3 „Setting
s <P2.1
WEIGHING>”. The description below merely deals with settings deviating from the default settings.
Navigation in menu see chap. 8.2
Menu item Parameters Explanation
P2.4.4
INFORM
For check weighing, the additional info box <THRESHOLD>
is available
P2.4.6
SHORTCUTS
Functions keys
F1; F2; F3; F4
For check weighing, the additional configuration <ENTER
THRESHOLD> is available
To Next Page
Loading...
Need help?
General
