104 AEJ-C/AES-C/PLJ-C-BA-e-1621
19.1.1 Enter target weight with the function key
Select application <DOSING>, see chap.16.1. The most recently used target
weight will be shown in the informational line of text. At the first start-up as
value 0.0000g.
Press the function key assigned to the <ENTER REFERENCE WEIGHT)
function (Display example F1).
The display to enter the target weight appears.
Use the navigation keys to enter target weight and confirm by pressing the
PRINT-key. The display to enter the tolerance interval.
Use the navigation keys to enter tolerance and confirm by pressing the
PRINT-key.
The negative value of the target weight will be shown.
To Next Page
Loading...
Need help?
General
