KERN AEJ-C Series

168 AEJ-C/AES-C/PLJ-C-BA-e-1621
29.6.27 List of available operating modes
Command: OMI CR LF
Possible replies:
OMI˽ CR LF
N° designation CR LF
N° designation CR LF
OK CR LF
Command accepted, available operating modes are shown
OMI˽I CR LF
Command valid but cannot be executed at the moment
n
Operating mode
1
- Weighing
2
- Parts counting
3
- Percent determination
4
- Dosing
5
- Make up recipes
6
- Animal weighing
7
- Density determination “solid matter“
8
- Density determination “liquids“
9
- Maximum value function
10
- Totalization
11
- Tolerance weighing
12
- Statistics
13
- Pipette calibration
29.6.28 Set operating mode
Command: OMS CR LF
Possible replies:
OMS˽OK CR LF
Command valid
OMS˽E CR LF
No parameter or incorrect format
OMS˽I CR LF
Command valid but cannot be executed at the moment
29.6.29 Query current operating mode
Command: OMG CR LF
Possible replies:
OMG˽n˽OK CR LF
Command accepted, number of current operating mode will be
shown
OMG˽I CR LF
Command valid but cannot be executed at the moment
n Number of operating mode, see chap. 29.6.27