KERN AEJ-C Series

106 AEJ-C/AES-C/PLJ-C-BA-e-1621
19.1.2 Invoke target weight from product database
Preparation
For assigning function keys of your choice to the < SELECT PRODUCT > function
see chap. 17.1
 Press the function key assigned to the <SELECT PRODUCT> function
(Display example F1)
 Use the navigation keys to select the desired product and confirm by pressing
the PRINT-key.
 The negative value of the target weight will be shown
 Tare, as required and dose weighing load.
The indicators <MIN>, <OK> or< MAX> show the filling status,
see chap.19.1.1.
• For saving a product to the product database see chap. 15.2.1.
• Return to weighing mode, see chap. 17.2.1