KERN AEJ-C Series User Manual

AEJ-C/AES-C/PLJ-C-BA-e-1621 109
20.2.2 Enter known reference weight as numeric value
 For selecting application <DEVIATION> see chap.16.1. The reference weight
used will be shown in the informational line of text. At the first start-up as value
0.0000g.
 Press the function key assigned to the <ENTER REFERENCE WEIGHT)
function (Display example F2). Use the navigation keys to enter known
reference weight and the active digit will be flashing.
 Confirm input by pressing the PRINT button. The value will be accepted as
reference (100%) and shown in the informational line of text.
 Tare, as required and place load on pan. The weight of the item to be weighed
is displayed in percent, referring to the reference weight.
• The reference weight will remain saved until a new reference is defined.
• Return to weighing mode, see chap. 17.2.1

KERN AEJ-C Series Specifications

General

Brand	KERN
Model	AEJ-C Series
Category	Scales
Language	English