158 AEJ-C/AES-C/PLJ-C-BA-e-1621
29.5 General reply format
Commands Function
XX˽A CR LF
Command accepted, command executing
XX˽D CR LF
Command execution completed
(occurs after XX_A only)
XX˽I CR LF
Command valid but cannot be executed at the moment
XX˽^ CR LF
Command valid but range exceeded
XX˽v CR LF
Command valid but below range
XX˽OK CR LF
Command accepted and executed
ES˽ CR LF
Invalid entry
XX˽E CR LF
Time limit for stabilisation of weighing balance display was
exceeded
XX Command such as Z = Reset to zero
˽
Space (20h, 0x20)
To Next Page
Loading...
