AEJ-C/AES-C/PLJ-C-BA-e-1621 111
21 Animal weighing
The Animal weighing application facilitates weighing of unstable loads or weighing
under unstable ambient conditions. The weighing balance calculates the mean value
of several weighing results obtained over a set time.
Two different start / reset modes are available.
Manual (via keystroke, see chap. 21.1)
or
Automatic (automatic start after exceeding a minimum weight, see chap.
21.2).
21.1 Animal weighing by manual start
Preferences:
Applications can be adapted to your requirements by creating application-related
settings. The settings available depend on the currently enabled application.
A part of these settings is global, that is, they are – apart from a few exceptions –
identical to the weighing application (See chap 9.3 „Settings <P2.1 WEIGHING>”.
The description below merely deals with settings deviating from the default settings.
Menu item Adjustment
Description
<P2.9.7 AUTOSTART> <NO> The measuring cycle is started manually,
that is, placing of load must be confirmed
by keystroke.
<P2.9.7 MEAN. Z.> selectable
1 – 90 s
Duration after which the weighing balance
calculates the mean value of several
weighing results.
<P2.9.4> SHORTCUTS
Functions keys
F1; F2; F3; F4
<START> Assign key with “Measuring cycle
manual start” function
To Next Page
Loading...
Need help?
General
