KERN AEJ-C Series

110 AEJ-C/AES-C/PLJ-C-BA-e-1621
20.2.3 Invoke the reference weight from the product database
Preparation
For assigning function keys of your choice to the < SELECT PRODUCT > function
see chap. 17.1
 Press the function key assigned to the <SELECT PRODUCT> function
(Display example F1)
 Use the navigation keys to select the desired product and confirm by pressing
the PRINT-key.
The saved reference single weight will be shown in the informational line of
text.
 Tare, as required and place load on pan. The weight of the item to be weighed
is displayed in percent, referring to the reference weight.
• For saving a product to the product database see chap. 15.2.1.
• Return to weighing mode, see chap. 17.2.1