AEJ-C/AES-C/PLJ-C-BA-e-1621 119
Weight first sample
If required, set weighing balance to zero or tare. Place first sample on pan,
wait for stability sign, then press the PRINT-key.
Number of sample <1> will appear on the display; the weight will be saved and
then printed if an optional printer is connected.
Remove the first sample from the weighing pan.
Weigh additional samples
Follow the same procedure as for the first sample
Display / print result
After weighing the last sample press the F-key. The informational line of text
will show <RESULT>.
To Next Page
Loading...
