AEJ-C/AES-C/PLJ-C-BA-e-1621 123
Weight first sample
If required, set weighing balance to zero or tare. Place first sample on pan,
wait for stability sign, then press the PRINT-key.
The informational line of text will show the number of the sample < 1 >; the
weight will be saved. The result on the display will be tared automatically.
Weigh additional samples
Follow the same procedure as for the first sample
When the sample number is displayed you can use the function key assigned
to the <DELETE LAST> to undo the last weighing process.
To Next Page
Loading...
Need help?
General
