AEJ-C/AES-C/PLJ-C-BA-e-1621 127
The weighing balance is ready to calculate a peak value:
Select application < F11 MAX. HOLD >, see chap.16.1.
From that point onwards the weighing balance will register every weighing
value greater than the set threshold.
Place load on pan and weighing will start automatically on reaching the set
threshold.
The highest load value will be indicated by the “Max” indicator.
The peak value remains in the display until it is deleted by the UNIT button.
Then the balance is ready for further measurements.
• Return to weighing mode, see chap. 17.2.1
To Next Page
Loading...
