TPES-B_TPEJ-B-BA-e-2319 32
Place the number of parts on the weighing
plate or in the weighing container
according to the entered reference
quantity
Press the [F] key to save the weight value
of the reference quantity
The reference quantity on the display
starts flashing
Put more reference pieces (quantity must
be twice of the reference quantity selected
at the beginning → Example: Selected =
10 items, additional reference pieces = 20
items or less)
The stability display appears and an
acoustic signal sounds when the weight
value of the reference pieces has been
stored
Press the [F] key to finish weighing the
reference quantity
An acoustic signal sounds and <End.> is
displayed
The display changes into the piece
counting mode
Place more weighing goods on the
weighing plate or into the weighing
container
Read off the piece quantity
To Next Page
Loading...
Need help?
General
