KERN PES 620-3M - Page 34

33 TPES-B_TPEJ-B-BA-e-2319
When the balance displays <Add>, <Sub> or <L-Err>:
• <Add>: Insufficient quantity of additional samples. Add more samples.
• <Sub>: Number of extra samples is too large. Decrease the sample.
• <L-Err>: The average piece weight is smaller than the smallest piece
weight
Further displays:
Press the [F] key to switch the display on the balance. The display depends on the
active weighing application and the enabled auxiliary functions.
Display
sequence
Display
Display on balance
1
Piece quantity (Pcs)
Net (if tared), Pcs
2
Total piece quantiy (Pcs)
Pcs, Σ (if totalizing
function has been
enabled)
3
Average piece weight (unit A)
Pcs
4
Total net weight (unit A)
Net (if tared)