To Next Page
S
Shannon FloresAug 30, 2025
What to do if there is an error greater than 1.0% at the internal adjustment on KERN PES 620-3M Scales?
- CCheryl MossAug 31, 2025
Perform internal adjustment again on your KERN Scales.
What to do if there is an error greater than 1.0% at the internal adjustment on KERN PES 620-3M Scales?
Perform internal adjustment again on your KERN Scales.
How to fix a faulty end of the internal adjustment on KERN PES 620-3M?
Perform internal adjustment again on your KERN Scales.
What causes the display to not change when the M symbol flashes on KERN PES 620-3M?
If the display on your KERN Scales doesn't change when the M symbol flashes, it could be due to draught or air movement; eliminate these. Table or floor vibrations might also be the cause, so stabilize the surface. Check that the weighing plate isn't in contact with other objects. Electromagnetic fields or static charging could interfere, so try relocating the scale or switching off interfering devices.
Why is the weighing result wrong after adjustment on my KERN PES 620-3M?
If your KERN Scales show an incorrect weighing result after adjustment, ensure the adjustment was performed under stable ambient conditions. Also, verify that the weights used for adjustment and testing are consistent.
How to resolve maximum weighing range exceeded error on KERN PES 620-3M?
If you've exceeded the maximum weighing range on your KERN Scales, split the sample and weigh each portion individually. Alternatively, use a lighter tare weight.
What to do if the displayed weight is permanently changing on my KERN PES 620-3M Scales?
If the displayed weight on your KERN Scales is constantly changing, it might be due to a draught or air movement; try to eliminate these. Table or floor vibrations can also cause this issue, so stabilize the surface. Ensure the weighing plate isn't touching other objects. Electromagnetic fields or static charging could also be the reason; consider relocating the scale or switching off any nearby devices causing interference.
Why is the weighing result wrong on my KERN PES 620-3M?
If the weighing result on your KERN Scales is incorrect, ensure the display is at zero. If not, zero the display. Also, the balance may need re-adjusting. Make sure the balance is placed on a level surface. Extreme temperature fluctuations or electromagnetic fields could also be the cause, so control the ambient temperature and consider moving the scale to a different location or switching off any interfering devices.
General
