SYSTem:COMMunicate:LAN:TELNet:WMESsage "<string>"
SYSTem:COMMunicate:LAN:TELNet:WMESsage?
Sets the welcome message displayed when communicating the instrument with Telnet.
Parameter Typical return
<string> A string of up to 63 characters
Default: "Welcome to Keysight's <instrument model number> Data Acquisition Sys-
tem"
"Welcome to the Telnet Session"
Define a welcome message: SYST:COMM:LAN:TELN:WMES "Welcome to the Telnet Session"
– Query returns the command prompt as ASCII strings enclosed in double quotes.
– Instrument uses LAN port 5024 for SCPI Telnet sessions and port 5025 for SCPI Socket sessions.
– SYSTem:SECurity:IMMediate sets this parameter to its default value.
– The setting is non-volatile, and does not change when power has been off, after a Factory Reset (*RST com-
mand), or after an Instrument Preset (SYSTem:PRESet command).
Keysight DAQ970A/DAQ973A Programming Guide 333
2 SCPI Programming
To Next Page
Loading...
Need help?
General
