Keysight Technologies N6700 User Manual

1 Quick Reference
20 Keysight N6700 User’s Guide
SCPI Command
Description
[SOURce:]VOLTage (continued)
:LIMit
[:POSitive]
[:IMMediate][:AMPLitude] <NRf+>, (@chanlist)
Sets the positive voltage limit (only on N678xA SMU)
:COUPle <Bool>, (@chanlist)
Sets the voltage limit tracking state (only on N6784A)
:NEGative
[:IMMediate][:AMPLitude] <NRf+>, (@chanlist)
Sets the negative voltage limit (only on N6784A)
:MODE FIXed | STEP | LIST, (@chanlist)
Sets the voltage trigger mode
:PROTection
[:LEVel] <NRf+>, (@chanlist)
Sets the over-voltage protection level
:DELay[:TIME] <NRf+>, (@chanlist)
Sets the over-voltage protection delay (only on N6783A)
:REMote
[:POSitive][:LEVel] <NRf+>, (@chanlist)
Sets the positive remote OV protection level (only on N678xA SMU)
:NEGative[:LEVel] <NRf+>, (@chanlist)
Sets the negative remote OV protection level (only on N6784A)
:TRACking
(Tracking commands only on Option J01)
[:STATe] <Bool>, (@chanlist)
Enables/disables tracking OVP
:OFFSet <NRf+>, (@chanlist)
Sets the tracking OVP offset
:RANGe <NRf+>, (@chanlist)
Sets the output voltage range
:SLEW
[:IMMediate] <NRf+> | INFinity, (@chanlist)
Sets the output voltage slew rate
:MAXimum <Bool>, (@chanlist)
Enables/disables the maximum slew rate override
STATus
:OPERation
[:EVENt]? (@chanlist)
Returns the value of the operation event register
:CONDition? (@chanlist)
Returns the value of the operation condition register
:ENABle <NRf>, (@chanlist)
Enables specific bits in the Event register
:NTRansition <NRf>, (@chanlist)
Sets the Negative transition filter
:PTRansition <NRf>, (@chanlist)
Sets the Positive transition filter
:PRESet
Presets all enable and transition registers to power-on
:QUEStionable
[:EVENt]? (@chanlist)
Returns the value of the questionable event register
:CONDition? (@chanlist)
Returns the value of the questionable condition register
:ENABle <NRf>, (@chanlist)
Enables specific bits in the Event register
:NTRansition <NRf>, (@chanlist)
Sets the Negative transition filter
:PTRansition <NRf>, (@chanlist)
Sets the Positive transition filter
SYSTem
:CHANnel
[:COUNt]?
Returns the number of output channels in a mainframe
:MODel? (@chanlist)
Returns the model number of the selected channel
:OPTion? (@chanlist)
Returns the option installed in the selected channel
:SERial? (@chanlist)
Returns the serial number of the selected channel
:COMMunicate
:RLSTate LOCal | REMote | RWLock
Specifies the Remote/Local state of the instrument
:TCPip:CONTrol?
Returns the control connection port number
:ERRor?
Returns the error number and error string
:GROup
(Group commands do NOT apply to N678xA SMU)
:CATalog?
Returns the groups that have been defined
:DEFine (@chanlist)
Group multiple channels to create a single output
:DELete <channel>
Removes the specified channel from a group
:ALL
Ungroups all channels
:PASSword:FPANel:RESet
Resets the front panel lock password to zero
:REBoot
Returns the unit to its power-on state
:VERSion?
Returns the SCPI version number
TRIGger
:ACQuire
(Acquire commands only on N676xA, N678xA SMU and Option 054)
[:IMMediate] (@chanlist)
Triggers the measurement immediately
:CURRent
[:LEVel] <NRf>, (@chanlist)
Sets the current trigger level
:SLOPe POSitive | NEGative, (@chanlist)
Sets the current trigger slope

Keysight Technologies N6700 Specifications

General

Brand	Keysight Technologies
Model	N6700
Category	Power Supply
Language	English