Keysight Technologies Z Series User Manual

Infiniium Z-Series Oscilloscopes User’s Guide 69
Index
A
accessing
index, 54, 55
online help, 53
accessories
and options,
12
acquisition
starting and stopping, 38
adjusting
analog channel’s vertical offset, 43
analog channel’s vertical scaling, 43
airflow requirements, 14
application software, 22
associating measurement results with
waveforms, 48
Autoscale, 21, 37
Aux Out,Cal Out, 19
B
back panel, 15
buttons, 31
C
calibration
output,
21
cautions
cleaning,
24
channel keys, 43
channels
turning on or off analog channels, 43
characteristics, 13
checking the oscilloscope, 12
cleaning the oscilloscope, 24
color
use of,
31, 48
configuration
default,
21
edge trigger, 45
configuring
quick measurements,
48
connecting
LAN card,
15
power, 16
probes, 17
contents
online help, 53
contents topic, 53
customizing display layout, 48
cycling
markers through channels, 49
measurements through channels, 48
D
default setup, 21
Default Setup key, 37
disk
hard disk recovery, 52
display layout
customizing, 48
display update rate
increasing, 43
drag-and-drop measurements, 48
E
edge trigger
setting, 45
environmental characteristics, 13
F
finding information, 53, 55
front panel
connections, 17
interface, 25, 31
H
hard disk
recovery,
52
horizontal
zoomed timebase,
40
horizontal position
in zoom mode,
40
I
icons
measurement,
48
increasing display update rate, 43
index
accessing, 54, 55
information
methods for accessing, 53
inspecting the oscilloscope, 12
installing
application software, 22
K
keys, 31
analog channel, 43
Autoscale, 37
Clear Display, 37
Default Setup, 37
Markers, 49
Menu, 45
Multi Purpose, 48
Run, 38
Single, 38
Slope, 45
Source, 45
Stop, 38
Sweep, 45
Touch, 37
Zoom, 40
knobs, 31
analog channel’s vertical offset, 43
analog channel’s vertical scaling, 43
trigger level, 45
L
LAN card, 15
LED indicators, 31

Keysight Technologies Z Series Specifications

General

Brand	Keysight Technologies
Model	Z Series
Category	Test Equipment
Language	English