28 Infiniium Z-Series Oscilloscopes User’s Guide
2 Using the Oscilloscope
Front or Back Panel Inputs and Outputs
Trig Out and Aux Trig appear on the back panel in 50 GHz and 63 GHz bandwidth
models of Z-Series oscilloscopes, and on models that have the optional sync port.
They appear on the front panel in 20 GHz, 25 GHz, and 33 GHz bandwidth models.
Trig Out
Pulses corresponding to oscilloscope triggers can be sent to this BNC output.
Aux Trig
You can set up the oscilloscope to trigger on the auxiliary trigger signal connected
to this BNC input.
To Next Page
Loading...
Need help?
General
