6 Infiniium Z-Series Oscilloscopes User’s Guide
In This Guide
This guide provides the information you need to begin using the Infiniium Z-Series
oscilloscopes.
Chapter 1, “Setting Up the Oscilloscope,” starting on page 11 includes power and
air flow requirements, plus other setup information.
Chapter 2, “Using the Oscilloscope,” starting on page 25 gives an overview of the
front and back panel inputs and outputs, front-panel controls, and user interface,
and tells you how to perform basic operations with the oscilloscope.
Chapter 3, “Online Help and Other Information,” starting on page 53 describes the
Infiniium oscilloscope application’s online help contents and online demos. The
online help describes how to use the Infiniium oscilloscope application in detail.
Appendix A provides safety information in English and French.
Appendix B provides recommendations for working comfortably and safely while
operating the Infiniium oscilloscope.
For More Information
• For detailed information on how the oscilloscope makes measurements and
how to use the oscilloscope, see the Infiniium oscilloscope application’s online
help.
• For information on controlling the oscilloscope from a remote computer, see
the Oscilloscopes Programmer’s Reference found in the Infiniium oscilloscope
application’s online help.
• For information on testing and servicing the oscilloscope, see the Service Guide
found in the Infiniium oscilloscope application’s online help.
To Next Page
Loading...
Need help?
General
