Keysight Technologies Z Series User Manual

24 Infiniium Z-Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Turning Off the Oscilloscope
1 Press the power switch at the lower left corner of the oscilloscope front panel.
The oscilloscope will go through a normal Windows operating system
shutdown process.
Cleaning the Oscilloscope
Clean the oscilloscope with a soft cloth dampened with a mild soap and water
solution.
CAUTION
Do not use too much liquid in cleaning the oscilloscope. Water can enter the Infiniium
panels, damaging sensitive electronic components.

Keysight Technologies Z Series Specifications

General

Brand	Keysight Technologies
Model	Z Series
Category	Test Equipment
Language	English