12 Infiniium Z-Series Oscilloscopes User’s Guide
1 Setting Up the Oscilloscope
Inspecting Package Contents
✔ Inspect the shipping container for damage.
• Keep the shipping container or cushioning material until you have inspected
the contents of the shipment for completeness and have checked the
oscilloscope mechanically and electrically.
• If the shipping container is damaged, or the cushioning materials show signs
of stress, notify the carrier and your Keysight Technologies Sales Office.
Keep the shipping materials for the carrier’s inspection. The Keysight
Technologies Sales Office will arrange for repair or replacement at
Keysight’s option without waiting for claim settlement.
✔ Inspect the oscilloscope.
If there is mechanical damage or a defect, or if the oscilloscope does not
operate properly or does not pass performance tests, notify your Keysight
Technologies Sales Office.
✔ Verify that you received the following items in the Infiniium oscilloscope
packaging.
• Infiniium oscilloscope
• Power cord
• Keyboard
• Mouse (USB optical)
• Front panel cover
• Calibration cable (the 50 GHz and 63 GHz bandwidth models include a
second calibration cable for the RealEdge inputs)
• Connector savers (quantity of 5 for 20 GHz, 25 GHz, and 33 GHz bandwidth
models; additional 2 for 50 GHz and 63 GHz bandwidth models)
• ESD wrist strap
• Quick Start poster
If anything is missing, contact your nearest Keysight Technologies Sales Office.
✔ Verify that you received the options and accessories you ordered and that none
were damaged.
For a complete list of options and accessories available for the Z-Series
oscilloscopes, see the Infiniium Z-Series Oscilloscopes Data Sheet.
To Next Page
Loading...
Need help?
General
