Getting Started 1
Keysight 2050/60 X-Series User’s Guide 43
LED Indicator Sequences for the LAN Sensor
During power-up (via PWR LED indicator)
For LAN activity (via LAN LED indicator)
Power up
Off
Power on Internal zeroing and calibration Ready to use
HW/OS error Zeroing and calibration error
Send the SYST:ERR? query to read the
error message. It is recommended to
return the LAN sensor to Keysight if this
condition persists after power cycle.
Green Amber
Red
Red
blinking
Power up/LAN reset
Normal operation
Device identification
LAN connection error
Perform a LAN reset via its LAN reset switch. It is
recommended to return the LAN sensor to
Keysight if this condition persists after a LAN
reset.
Green
blinking
Green
Turn on Identification Indicator
Turn off Identification Indicator
Off
To Next Page