Keysight U2057XA - Limit Checking Application Example; Table A-1 Range of Values for Limits

Appendix A
Keysight 2050/60 X-Series User’s Guide 87
Limit Checking Application Example
The limits have been set at +4 dBm and +10 dBm for the above application. A fail occurs
each time the output power is outside these limits as shown below.
Table A-1 Range of values for limits
Unit Maximum Minimum Default maximum Default minimum
dB +200 dB –180 dB 60 dB –120 dB
dBm +230 dBm –150 dBm 90 dBm –90 dBm
% 10.0 Z% 100.0 a% 100.0 M% 100.0 p%
W 100.000 EW 1.000 aW 1.000 MW 1.000 pW
Swept source
Out
Device-under-test
Out
U2050/60
X-Series
Amplitude
Frequency
+4 dBm
+10 dBm
Fail
Fail
0
0
0
0
0
0
0
Upper limit line
Lower limit line