EasyManua.ls Logo

Kia 2020 Telluride - Blind-Spot Collision-Avoidance Assist (BCA)

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving your vehicle
1125
Blind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
around you, the warning will not
occur.
2) Closing at high speed
The Lane Change Assist feature will
alert you when a vehicle is
approaching in an adjacent lane at a
high rate of speed. If the driver acti
-
vates the turn signal when the sys
-
tem detects an oncoming vehicle,
the system sounds an audible alert.
Blind-Spot Collision-Avoidance
Assist (BCA)
The BCA detects the front lane
through the camera installed on the
upper front windshield and detects
the side/rear areas through radar
sensors.
The BCA may activate the Electronic
Stability Control (ESC) in accordance
with a colliding possibility with an
approaching vehicle while changing
lanes.
WARNING
󳱽Always be aware of road condi
-
tions while driving and be alert for
unexpected situations even
though the Blind-Spot Collision
Warning System and Blind-Spot
Collision-Avoidance Assist system
are operating.
󳱽The Blind-Spot Collision Warning
(BCW) system and Blind-Spot Col
-
lision-Avoidance Assist (BCA) sys
-
tem are supplemental systems to
assist you. Do not entirely rely on
the systems. Always pay atten
-
tion, while driving, for your
safety.
󳱽The Blind-Spot Collision Warning
(BCW) system and Blind-Spot Col
-
lision-Avoidance Assist (BCA) sys
-
tem are not substitutes for
OON058043NR
OON058153NR
on_en_us.book Page 112 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals