Specifications, Consumer information and
Reporting safety defects
68
Recommended lubricants and capacities
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability,
use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in
improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
LubricantVolumeClassification
Engine oil
*1*2
(drain
and refill)
Recommends
*1.Refer to "Recommended SAE viscosity number" on page 8-7.
*2.Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits,
they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine
friction. Often, these improvements are difficult to measure in everyday driving, but in a year's
time, they can offer significant cost and energy savings.
Gasoline
Engine
Lambda II 3.8
GDI ATK
6.87 US qt. (6.5 l)
ACEA A5 or above
*3
*3.If the ACEA A5 engine oil is not available in your country, you are able to use API service SL, IL SAC
GF-3, ACEA A3.
Automatic transaxle
fluid
Gasoline
Engine
Lambda II 3.8
GDI ATK
7.4 US qt. (7.0 l)
ATF SP-IV
(Recommended SK, MICHANG)
Coolant
Gasoline
Engine
Lambda II 3.8
GDI ATK
Approx. 12.9 US. qt.
(12.2 l)
Mixture of antifreeze and dis
-
tilled water
(Ethylene glycol base coolant
for aluminum radiator)
Brake fluidGasoline Engine
0.490.02 US. qt.
(0.460.02 l)
FMVSS135 DOT-3 or DOT-4
Rear differential oil (AWD)0.74 US qt. (0.7 l)
HYPOID GEAR OIL API GL-5,
SAE 75W/85
(SK HCT-5 GEAR OIL 75W/85
or equivalent)
Transfer case oil
(AWD)
Gasoline
Engine
Lambda II 3.8
GDI ATK
0.74 US qt. (0.7 l)
HYPOID GEAR OIL API GL-5,
SAE 75W/85
(Recommended: SK HCT-5
GEAR OIL 75W85 or equiva
-
lent)
Fuel75 US qt. (71 l)
Refer to "Fuel requirements"
on page 1-2
on_en_us.book Page 6 Thursday, January 31, 2019 2:23 PM