1. Turn the key switch to the "OFF"
position and unscrew the screw
(1) Work Lamp Glass Case
2. Unscrew the ground wire screw,
disconnect the connector, and
turn the bulb counterclockwise to
remove it. Then, install a new bulb
with the same capacity.
(1) Work Lamp Bulb
T11O755A
T11O756A
(1) Cabin Lamp Bulb
1. Fit a flat-bladed screwdriver into
the edge of the cabin lamp and pry
off the room lamp cover.
2. Remove the cabin lamp bulb by
pulling it up. Install a new bulb.
H11O666A
from the mounting hole with a
cross-head screwdriver to sepa-
rate the front glass case.
To Next Page
Loading...
