90 °C
60 °C
40 °C
Page 38 / 96
9.5. InfraPLUS mode (optional)
Starting InfraPLUS mode
2. Step inside the cabin and put the
backrest into position: Raise the
backrest, swing it out and then set
it down on the bench.
3. Place a towel down where you
will sit.
4. Sit down in front of the infrared
heater with a naked upper body.
D The infrared heater is controlled by
measuring the skin's temperature
(SensoCare).
SensoCare:
D Fully automatic heat intensity control
D Sensors integrated into the infrared heater
D Protects the skin against high temperatures
D SensoCare measures the skin temperature at four locations without
touching the skin, and automatically starts the infrared heater (if the
upper body is unclothed)
D Gentle heating occurs on multiple levels
To Next Page
Loading...
