90 °C
60 °C
40 °C
Page 93 / 96
12.6. Evaporator - Change the scent container
1
The scent container (1) is located on the
control panel next to the evaporator.
D Shake the scent container well
before replacing it.
1. Remove the hose from the empty
scent container.
2. Remove the empty scent container
from the bracket.
3. Remove the cover from the scent
container.
4. Place the new scent container in
the bracket.
5. Insert the hose into the scent
container until it reaches the
bottom of the container.
12.7. Evaporator - Scent line to the evaporator tube
2
3
4
1. Check the scent line between the
scent container and the scent
pump (2), replace if faulty.
2. Check the scent line between the
scent pump and the T-piece on the
evaporator tube (3), replace if
faulty.
3. Check and clean the scent inlet on
the T-piece on the evaporator
tube (4) - to do this, unscrew the
coupling nut and the scent inlet.
To Next Page
Loading...
