90 °C
60 °C
40 °C
Page 50 / 96
9.11. SANARIUM B - Commissioning the evaporator
2
3
1
Filling the evaporator
Only fill the evaporator when it is cold.
Fill with the water quantity required for the
intended bathing time.
Do not put any additives into the water.
1. Close the drain valve (1) - turn the drain
valve to the left.
2. Fill the evaporator on the filling unit (2)
with water.
D The filling quantity is shown on the level
indicator (3).
4
6
5
Risk of fire!
Do not fill the aroma cup on the heater.
Adding scent to the aroma cup
1. Remove the aroma cup (4) from the steam
outlet (6) with the aroma fork (5).
2. Pour diluted scent into the aroma cup.
3. Place the aroma cup (4) back on the
steam outlet (6).
To Next Page
Loading...
