90 °C
60 °C
40 °C
Page 34 / 96
9.4. SANARIUM mode
Risk of fire!
Before commissioning the controller, always ensure that there are no flammable objects
near the sauna heater or infrared heater in the cabin.
On models with a key switch (optional), changes to bathing parameters in the
sauna cabin must be confirmed by pressing the key switch within 30 minutes.
The key switch symbol in the display goes out after confirmation.
Due to physical phenomena, when the turboheat function is activated, there are
temperature differences between the actual temperature in the cabin and the
temperatures displayed on the thermometer and on the controller.
This temperature is harmonised after a few minutes.
Bathing mode
Sauna
Sanarium
Clues Settings Light
Infrared
Programs by type of
bathing
Programs by effect
1
Starting SANARIUM mode
D For SANARIUM bathing mode,
commission the evaporator
beforehand.
D To prepare the evaporator, see
pages 47, 50, 51, 52.
1. Press the SANARIUM symbol (1).
To Next Page
Loading...
