Klafs 21033 - Page 35

90 °C
60 °C
40 °C
Page 35 / 96
9.4. SANARIUM mode
Sanarium
Bathing time
Temperature
Humidity
Sanarium
Bathing time
Temperature
Humidity
Clues Fan Music
LightColour light
Sunset
PUR STOP
Back
90
19:00 - 22:00
Clues Fan Music
Light
Colour light
Sunset
PUR STOP
Back
2
3
Starting SANARIUM mode
The background colour (2) changes to blue
during the heat-up phase. The sauna starts
with the bathing parameters that were set for
the last program used.
The sauna heater switches on and the cabin
heats up.
The background colour (2) changes to "ready
to use" (orange). The cabin is ready to use.
D To select a special
program/custom program, see
page 61.
D To change the temperature, see
page 66.
D To change the humidity, see
page 67.
D To change the bathing time, see
page 65.
Ending SANARIUM mode
1. Press the STOP symbol (3).
The sauna heater switches off.
Subsequent drying starts.
The controller then goes into standby mode.