90 °C
60 °C
40 °C
Page 36 / 96
9.4. SANARIUM mode
PUR STOP
Clues Fan Music
Light
Colour light
Sunset
Back
Final drying
1 2
3
4
Automatic follow-on program (1) after
ending SANARIUM mode
1. On models with wall-mounted air
extractor control: Set air extractor
opening to position 4.
D If SANARIUM was used for more
than ten minutes, the follow-on
program will start automatically
after ending the program.
Symbol (2) is displayed. The
remaining program time before the
follow-on program starts is shown
on the display (3).
D The sauna heater heats up again,
causing an increased exchange of
air. This ventilates the cabin.
D The controller automatically goes
into standby mode after the
follow-on program has finished.
Airing the cabin
D After ending Sauna /
SANARIUM / InfraPLUS mode or
the follow-on program, air the
cabin by opening the cabin door.
D Open the vent flap (optional) fully
when airing the cabin (4).
To Next Page
Loading...
