90 °C
60 °C
40 °C
Page 33 / 96
9.3. PUR bathing mode
The PUR bathing mode is only available with the Sauna bathing mode.
Sauna
Bathing time
Temperature
PUR STOP
Back
Clues Fan Starry skyLight
Colour light
Sunset
90
19:00 - 22:00
1
Starting PUR bathing mode
D To start the P
UR bathing mode, the
Sauna bathing mode must be
started and the cabin must reach
the preset temperature.
Once the preset temperature has been
reached, the P
UR symbol (1) appears.
1. Press the P
UR symbol (1).
D During PUR operation, the sauna
heater is switched off.
D The heat stored in the sauna stones
is released.
D After approximately 20 minutes, or
once the temperature in the sauna
cabin has decreased by
approximately 15 °C, the P
UR
bathing mode stops automatically.
The sauna heater begins heating
again.
Stopping the PUR bathing mode
1. Press the P
UR symbol (1).
The sauna heater begins heating again.
To Next Page
Loading...
