90 °C
60 °C
40 °C
Page 37 / 96
9.5. InfraPLUS mode (optional)
Risk of fire!
Before commissioning the controller, always ensure that there are no flammable objects
near the sauna heater or infrared heater in the cabin.
On models with a key switch (optional), changes to bathing parameters in the
sauna cabin must be confirmed by pressing the key switch within 30 minutes.
The key switch symbol in the display goes out after confirmation.
Bathing mode
Sauna
Sanarium
Clues Settings Light
Infrared
Infrared
Bathing time
Temperature
Programs by type of
bathing
Programs by effect
Intensity Timer
Clues Fan Music
LightColour light
Sunset
PUR STOP
Back
2
1
Starting InfraPLUS mode
1. Press the "Infrared" symbol (1).
The background colour (2) changes to blue
during the heat-up phase. The sauna starts
with the bathing parameters that were set for
the last program used.
The sauna heater and the InfraPLUS infrared
heater switch on. The cabin heats up.
D The infrared heater will not switch
on if the cabin temperature is over
50 °C, e.g. due to a previous
sauna on SANARIUM session.
The background colour (2) changes to "ready
to use" (orange). The cabin is ready to use.
D To select a special
program/custom program, see
page 61.
D To change the InfraPLUS intensity,
see page 68.
D To change the bathing time, see
page 65.
To Next Page
Loading...
