90 °C
60 °C
40 °C
Page 85 / 96
11.3. Rectifying faults, resetting error messages
Notice:
Only allow work on electrical components/assemblies to be carried out by
qualified electricians who work in accordance with electrical rules and regulations.
Switch the controller off, disconnect it from the mains and make sure that it cannot
be switched on again.
1
1. Switch the controller off at the main
switch (1).
2. Disconnect the controller from the
mains and make sure that it cannot
be switched on again.
3. Rectify the fault.
4. Reconnect the controller to the
mains.
5. Switch the controller on at the main
switch (1).
To Next Page
Loading...
