EasyManua.ls Logo

Klafs 21033 - Page 40

Klafs 21033
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90 °C
60 °C
40 °C
Page 40 / 96
9.5. InfraPLUS mode (optional)
PUR STOP
Clues Fan Music
Light
Colour light
Sunset
Back
Final drying
4
1 2
3
Option: Automatic follow-on program (1)
after using InfraPLUS mode
1. On models with wall-mounted air
extractor control: Set air extractor
opening to position 4.
D If InfraPLUS was used for more
than 10 minutes, the follow-on
program will start automatically
after the program ends. Symbol (2)
is displayed. The remaining
program time before the follow-on
program starts is displayed
digitally (3).
D The sauna heater heats up again,
causing an increased exchange of
air. This ventilates the cabin.
D The controller automatically goes
into standby mode after the
follow-on program has finished.
The time appears on the display.
Airing the cabin
D After using the
Sauna/SANARIUM/InfraPLUS
mode or follow-on program, air the
cabin by opening the cabin door.
D Open the vent flap (optional) fully
when airing the cabin (4).

Table of Contents

Related product manuals